Nulon Radiator Corrosion Protector provides effective protection for radiators and heat exchangers. It is suitable for use with all metal types generally found in cooling systems, including brass, copper, aluminum and cast iron. Use Nulon Radiator Corrosion Protector to protect new and old installations against corrosion that can cause significant problems such as overheating, leaks and premature failure of your vehicle’s cooling system.
Benefits:
- Contains advanced long life inhibitor technology for maximum corrosion protection of all cooling system metals for 3 years or 100,000km
- Built in Water Wetter promotes quicker heat reduction over conventional coolant
- Protects aluminium, steel, cast iron, solder, copper and brass
- Safe for all hoses, gaskets and seals
- Exceeds Australian AS 2108-2004 Type B standard
Direction for Use:
Directions for Service Refill: Refer to the owner’s manual for cooling system capacity. If the cooling system is dirty we recommended using Nulon Radiator Flush before using this product.
- If the system is clean, ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose.
- Replace drain plug or bottom radiator hose.
- Add Nulon Radiator Corrosion Protector to the radiator first then top-up with clean, soft or demineralised water. (Makes up to 20 Litres)
- Check the coolant level is correct when system is cool.
First Aid and Safety:
Safety: Harmful if swallowed. May cause respiratory irritation. Use only outdoors or in a well-ventilated area. Store locked up.
First Aid: If Swallowed: Immediately call a Poison Centre or doctor/physician. Rinse mouth. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).
Environment: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.
ASTM | ASTM D3306 |
Society of Automotive Engineers (SAE) | SAE J1034 |
ASTM | ASTM D4985 |
AS Claims | AS 2108-2004 Type B |
Society of Automotive Engineers (SAE) | SAE J1941 |