Kicker Mono Subwoofer Amplifier 2,400 watts RMS x 1 at 2 ohms - 44KXA2400.1
Universal Part
Buy now, Pay later options
Perfection in connection
Kicker's Fail-Safe Integration Technology (FIT2TM) rejects noise and eliminates interference caused by your car's electronics, allowing you to hear your music in its purest form. With speaker-level inputs, you can connect this amp to practically any stereo, even factory systems. Kicker also assists you in correctly setting the gain on this amp by providing free test tones for download. You play a tone and raise the gain knob until it turns red. Then you lower it down till it just fades out, and the gain on the amp is correctly calibrated.
Kicker's Fail-Safe Integration Technology (FIT2TM) rejects noise and eliminates interference caused by your car's electronics, allowing you to hear your music in its purest form. With speaker-level inputs, you can connect this amp to practically any stereo, even factory systems. Kicker also assists you in correctly setting the gain on this amp by providing free test tones for download. You play a tone and raise the gain knob until it turns red. Then you lower it down till it just fades out, and the gain on the amp is correctly calibrated.
This amplifier has a KXARC Bluetooth® wireless remote control, so there's no need to run a wire from the amp to your remote. You may change the subwoofer volume from the driver's seat, enhance bass with Kicker's SHOCwaveTM bass restorer, alter sub phase, and receive a warning if the sub signal clips.
Bass controls are hidden behind the folding door
To keep the signal clean, use the steeply sloping low-pass and subsonic filters to tune for practically any enclosure and sub. A parametric KickEQTM allows you to select a bass frequency to boost as well as how many notes above and below that center frequency you want to boost.
The KX 2400-watt mono amplifier is the most powerful amp on the market. This beast is designed for massive quantities of bass and readily delivers the punch you need for strong low-end rumbling.
Features:
- Class D Power Plant
- One-Ohm Stable
- SHOCwave™ Bass Restoration Processor
- KXARC Wireless Remote Included
- Gain Control With "Optimal Input" Indicator. Test tones available here!
- Variable 24dB Subsonic Filter
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- Easy Access to Settings Behind Hinged Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Red LED Light Pipe
| RMS Power [Watts] | @ 14.4V, 4? mono, ? 1% THD+N : 1200 x 1 | |
| @ 14.4V, 2? mono, ? 1% THD+N : 2400 x 1 | ||
| @ 14.4V, 1? mono, ? 1% THD+N : 2400 x 1 +/- 10% | ||
| Length [in, cm] | 15-�, 39.4 | |
| Height [in, cm] | 2-?, 5.5 | |
| Width [in, cm] | 8-5?16 , 21 | |
| Frequency Response ± 1dB | 10Hz�160Hz | |
| Signal-to-Noise Ratio | 95dB | |
| Input Sensitivity | 250mV�10V | |
| Selectable Electronic Crossover | Variable Lo-pass 40Hz�160Hz, 24dB/octave | |
| Subsonic Filter | Variable 10�80Hz, 24dB/octave | |
| KickEQ+� Parametric Bass Boost | ||
| (Remote Control Adjustable) | Boost - Variable 0-18db | |
| Center Frequency - 20Hz-80Hz | ||
| Bandwidth 1-5 | ||
| Remote Bass | Yes | |
| CEA Power | 1200 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) | |
| CEA Signal-to-Noise Ratio | -75dB CEA-2006B (ref: 1W, A-weighted)" |
