Aerpro Steering Wheel Control Interface To Suit Mitsubishi And Peugeot - CHMB6C
![](/ab/_ui/responsive/common/images/checkSuitabilityIcon.png)
Buy now, Pay later options
Engineered to suit various Mitsubishi & Peugeot vehicles without OEM Amplified sound systems, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required.
Installation of the aftermarket head unit is simplified even further when paired with the optional Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket head unit and the Aerpro Steering Wheel Control Interface.
This interface supports OEM AUX retention when connected to compatible aftermarket head unit with Rear RCA AUX input.
Features:
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
- Supports OEM Phone Button when connected to compatible aftermarket Bluetooth head units
- OEM AUX retention when connected to compatible aftermarket head unit with Rear RCA AUX input
- Not suitable for OEM amplified vehicles
- Fitted with a vehicle specific plug, no cutting of wires required
- Recommended to be installed with an Aerpro APP9 Head unit Secondary ISO Harness & SWC Patch Lead (sold separately)
- Requires SWC patch lead to provide compatibility with the aftermarket head unit (sold separately)
To suit the following vehicle/make/model:
- Mitsubishi Challenger 2009 - 2013 PB
- Mitsubishi Lancer 2007-2013 CJ (Head unit Dependant)
- Mitsubishi Outlander 2007-2012 ZG, ZH (Head unit Dependant)
- Mitsubishi Pajero 2006-2014 NS, NT, NW (Head unit Dependant)
- Mitsubishi Triton 2009 - 2014 MN [GL-R, GLX]
- Mitsubishi Triton 2009-2012 MN [GLX-R]
- Peugeot 4007 2009-2012
Note:
- Aftermarket head unit must be SWC compatible.
- SWC patch lead is also required to enable SWC (sold separately).
- Not suitable for OEM amplified vehicles.
Part number: CHMB6C
Interface Type: | Analogue |
Patch Lead Type: | C |
Phone Button Compatibility: | Yes |
Voice Assistant Button Support: | No |
Outputs: | |
Reverse Trigger: | No |
Park Brake: | No |
Speed Pulse: | No |
Illumination: | Yes |
Amp Remote: | No |
Other Retention: | |
OEM Amplified System: | No |
Oem Aux Input: | Yes (Aftermarket Headunit Requires Rear Rca Aux Input) |